Our company make a design to combine an exposure and vertical ultraviolet dyer, operator can put this machine by a screen printer, it is movable and small volume than table type. This machine adopt wave length 365nm UV tube, it has a strong penetrating power and suitable for more than 80% of UV curing products. This machine is mainly used for exposing in screen printing, pad printing and stamping. Exposing effective size: 6076 cm. Roller installed desktop mobile exposing.
Double row dedicated UV LED lamp bead lasts for 50,000 hours. Countdown timer Setting is simple and automatically save setting data. Methods of using the timer. Before using, please press the "C" button to reset, the display shows. 00:00 00 and it is flashing state.
Press the "hour" and "minute" and "second" button separately to set the countdown of the electrify time, the display shows "ON". Press the "start/pause" button to start the countdown. For example: set exposure time 5 minutes 30 seconds : At first press the "C" button to remove the original set ; Then press "minute" set to"5"; press "seconds" set to "30"; Then press the "start/pause" to start the countdown, lamp open; After five minute 30 seconds countdown, plate burning machine tube closed. This setting do not need to change, it is automatically saved. When the machine starts again, the countdown is still 5 minutes and 30 seconds.Basic parameters of the timer: Countdown: 1 SEC - 99 hours 59 minutes and 59 seconds Working temperature: - 25 c - 65 c Parameter. UV tube: 8pcs, each piece is 18W wave length : 395nm Exposing effective size: 23.630in (6076 cm) Machine height is adjustable, distance from heating box to the ground is min70mm. 110V 2428Inches Push-pull Movable Screen Printing LED Exposure Unit--006878.