Screen Printing Basic Starter Kit. 2 - 20"x24" Aluminum Screens with 110 mesh. 2- 10 inch & 2- 8 inch squeegees with a 4 place squeegee rack. 2 Pints of plastisol ink - black & white. 1 Ink scoop and 1 Ink stirrer.
4oz of pallet / platen liquid adhesive. More eco-friendly than traditional spray adhesives, and last much longer!
Exposure unit / stand- 500 Watt Halogen Light. You will need to provide a small sheet of glass with this exposure unit. This can usually be easily found in a picture frame, or at your local hardware store. 1 Pint of emulsion (coats 8-12 screens).
3 Chemical resistant spray heads. 1 Roll of screen masking tape. 10 Test print pellons - 5 white & 5 black. 10 Inkjet Films - 8.5"x11". If you would like to add / remove / change any product in your kit, just let us know.
Custom kits for your specific printing needs are available. Short, stubby, sturdy legs keep the press secure while mounted, and keep your workspace clear from big bulky legs that come on most presses.Adjustable dual ball bearing registration system makes for consistent, solid and smooth print arm registration. Keeps your print arm swivel secure and spinning freely. Rock solid print arm mounts that you can count on for rock solid registration! SCREEN CLAMP - Swivel screen clamp nuts, keeps your screen from moving while locking it in the screen clamp. Multiple points of off contact adjustment, so you can really dial in any printing circumstance. All of our platen brackets are "50 TON PRESS STAMPED" to insure a tight fit, that holds your platen exactly where you want it. This press uses springs with turnbuckle adjustments to hold your print arm in the "raised" position, while not printing. The turnbuckle adjustments allow you to adjust the tension of the spring, to accommodate larger screens, smaller screens, if you have micros installed, etc. Durable, chemical resilient, heavy duty, baked on powder coat finish, for years of protection. Accepts 23"x31" screens, with no upgrades required. ASSEMBLY INSTRUCTIONS, HOW TO MOUNT YOUR PLATEN BRACKET INSTRUCTIONS, POINTS OF ADJUSTMENT INSTRUCTIONS. While nearly any other press on the market fails to offer upgrade options, this press is an investment that can continue to grow with you and your business. With the THE SPRINGER you can ADD. PRINTING STATIONS, HAND MICROS, XYZ MICROS, SIDE CLAMPS, ETC. This kit requires some light assembly. Detailed assembly instructions are included.
If you have any questions, PLEASE FEEL FREE TO ASK! We are always available to help! All items must be new and unused.